Our Membranes
Submerged Membrane Modules
Memstar’s submerged modules are made of high performance PDVF hollow fibre UF membranes and are characterised by high performance, ease of cleaning, high flux and lower energy consumption. The modules are designed mainly for the processes of MBR (Membrane Bio-Reactor) and MCR (Membrane Chemical Reactors). The modules are used in MBR process for treatment of municipal / industrial waste water. In MCR process, the membrane modules can be used for the production of tap water and industrial water by removing suspended solids / flocculants from the raw water. (e.g. surface water, plant wastewater).
Product Features
- Antifouling
Unique surface characteristics resistant to contamination - Consistent & High Flux
High porosity and water permeability - High Performance
Very stable & resistant to oxidation & corrosion, long service and efficient separation - Easy to Install and Small Footprint
Simple structure, easy operation - Easy to Operate with Low Maintenance
Easy to remove fouling contaminants by various cleaning methods such as air scouring, chemical cleaning, water flushing, etc. - Low Energy Consumption
Low filtration resistance, low trans-membrane pressure (TMP) and low energy consumption - Good Mechanical Strength & Stability
3G TIPS hollow fibres membranes
Applications
- MBR systems for treatments of municipal and industrial wastewater
- Wastewater treatment and recycling
- MCR systems for production of municipal tap water, drinking water and industrial water
- Pre-treatment for RO processes
Submerged Membrane Specifications:
Parameter |
SMM-1015 |
SMM-1522 |
SMM-1535 |
SMM-2030 |
SMM-2045 |
||
Membrane material |
PVDF |
||||||
Effective membrane surface area(m2) |
15 |
22 |
35 |
30 |
45 |
||
Nominal Pore size(μm) |
0.04 |
||||||
Dimensions, L x W x H (mm) |
571×45×1040 |
571×45×1540 |
571×45×2040 |
||||
Wet weight (kg) |
9 |
11 |
14 |
13 |
15 |
||
Permeate pipe material |
ABS |
||||||
Potting material |
Epoxy resin & PU |
||||||
Filtration mode |
Outside-in |
||||||
Permeate pipe port |
OD32 UPVC |
Integrated skids of membrane modules can be supplied based on customer’s requirements
Membrane Bio Reactor
Membrane Bio-Reactor (MBR) is a new technology for wastewater treatment, combining conventional biological process with membrane separation. In MBR systems, the membrane modules are placed in a tank for separation of water from sludge. The efficiency of biological treatment is significantly improved through highly concentrated sludge resulting from interception of the membrane. The permeate (product water) of MBR systems has excellent quality and can be used for certain purposes. MBR is an important technology for wastewater treatment and recycling.
Advantages of MBR
- Highly Efficient/ Effective Biological Treatment
- Reduced Land Requirement for MBR – reduction of 1/3-2/3 of land compared to conventional process
- Suitable for Varying Quality of Influent Water Stable Quality of Permeate (Product Water)
- Low Energy Consumption
- Reduction in Sludge
- Reasonable Cost for Operation/ Maintenance
Membrane Chemical Reactor Applications
Membrane Chemical Reactor (MCR) combines chemical flocculation and membrane separation, in which coagulant is added to precipitate suspended solids followed by the removal of the sediments through high performance separation of UF membranes. MCR technology can be used for water purification and recycling of wastewater.
Advantages of MCR
- Reduced Land Requirement
- Suitable for Varying Quality of Influent Water Stable Quality of Product Water
- Reasonable Costs for Operation/ Maintenance